Reset The Filter Counter - Eiki EK-350 Series Service Manual

Reset the filter counter

Reset the filter counter before you changing the filter.
1. Press MENU button and the OSD displays. Press
to select Expand menu, press
2. Press button to select "Filter Counter", press
OK. Press button to select "Filter counter reset" and press
OK. The "Filter counter reset?" message displays.
3. In another pop-up dialog box, select Yes to reset the filter counter.
Note:
● Please cut off the power before changing the filter.
● Make sure the projector is stable and in a safe working
environment to prevent the filter from falling, when you
install the filter.
● Do not operate the projector once you removing the filter
component. Otherwise, the dust attached to the lens
assembly will damage the image quality.
● Do not place small objects into the air intake as it may
result in the projector working failure.
● Replace the filter with the specified type.
● Reset the filter counter before changing the filter, as the
projector may power off to ensure the security.
● Please contact the authorized dealer to purchase the the
filter component.
button or OK.
button or
-12-
button