Appendix-Rs232 Control Commands - Eiki EK-350 Series Service Manual

Appendix
Serial control
RS232 Control commands
2. Basic commands
Distinguish the letter case.and enter Each command ends with [CR] (enter) .
Command Option
C00 POWER ON
C01
POWER OFF(Immediatly)
C02 POWER OFF
C36 HDMI1
C38
HDMI2 (MHL)
C05 VGA IN 1
C06 VGA IN 2
2.1 POWER ON command
Command "C00"[CR]
Details Power ON action.
Do nothing,when you are in Power on state .
Send this command can force the end of the countdown in the countdown state.
Return Value
Receive Successfully
Receive Unsuccessfully
2.2 POWER OFF command（Namely Power Off immediatly）
Command
"C01"[CR]
Details
Power OFF action.
Send this command can force your projector to power off during in power on state.
Return Value Receive Successfully
Receive Unsuccessfully
2.3 POWER OFF command
Command "C02"[CR]
Details Power OFF action.
A "POWER OFF " dialog box pops up when sending the PoWER oFF command ,and do once
again can force your projector to power off.
Send this command can force the end of the countdownthe in the countdown state.
Return Value Receive Successfully
Receive Unsuccessfully
Note: [ACK] "CR" is the return value for receiving valid commands.
Command
C07
C33
C34
C15
C16
C17
C32
[ACK]［CR］
" ？ " [CR]
[ACK]［CR］
" ？ " [CR]
[ACK]［CR］
" ？ " [CR]
-46-
Option
Video
Component
S-Video
Network
Memory Viewer
USB Display
HDBaseT