Techly IDATA EX-HL21TYP User Manual page 10

EN - 10
FAQ
Q: Why there is no image output on display device?
A: 1) Please check the power supply and all the cables are well-connected
2) Please check whether there is a HDMI signal input
3) Please make sure that the corrisponding netowrk port output is not turned off
by RS-232commenad
Q: Why the output image is unstable?
A: 1) Please check whether the lenght of network cable is within the specified
range
2) Press the reset button on TX or RX to restart and reconnect
Q: Why does the TV have a snowy/fuzzy screen?
A: 1) Change to a better quality or shorter HDMI cable, the recommended length of
HDMI cable is less than or equal to 5 meters
2) Try another network cable and make sure that the length is within the
specified range
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the
product or damage caused due to incorrect use of this product.
In compliance with EU Directive WEEE this product is marked with
this symbol. It means that used electrical and electronic products
should not be mixed with general household waste.
There is a separate collections system for these products in
compliance with WEEE directive, otherwise contaminative and
hazardous substances can pollute the environment.
With the CE sign, Techly
basic European standards and directives.
WWW.TECHLY.COM
ensures that the product is conformed to the
®
1x2 HDMI SPLITTER
WITH EXTENDER POC