Vibration Load - AL-KO MT 40 Translation Of The Original Instructions For Use

Safety instructions
■
After pulling out a new line, al-
ways bring the appliance into
its normal working position
before switching it on.
■
Do not use a metallic cutting
line.
■
Always keep the guard plate,
spool head and motor clear of
mowing residues.
■
People who are not familiar
with the appliance should
practice handling it while the
motor is turned off.
■
When working on a slope:
■
Never work on a smooth
and slippery slope.
■
Always mow across the
slope, never down or up.
■
Always stand below the
cutting device.
■
After contact with a foreign
object:
■
Switch off the engine.
■
Check the machine for
damage.

3.7.2 Vibration load

WARNING! Danger due to
vibration. The actual magnitude
of the vibration emissions during
the use of the appliance may de-
viate from that stated by the
442345_c
manufacturer. Observe the fol-
lowing influencing factors before
or during use:
■
Is the appliance being used
as intended?
■
Is the material being cut or
processed in the proper man-
ner?
■
Is the appliance in a proper
condition of use?
■
Is the cutting tool properly
sharpened or is the correct
cutting tool installed?
■
Are the handle grips and any
optional vibration grips mount-
ed, and are they firmly at-
tached to the appliance?
■
Only operate the tool at the
motor speed required for the
respective work. Avoid using
the maximum speed in order
to reduce noise and vibra-
tions.
■
The noise and vibrations of
the tool may increase due to
improper use and mainte-
nance. This leads to health
damage. In this case, immedi-
ately switch off the tool and
have it repaired by an autho-
rised service workshop.
■
The degree of stress due to
vibration depends on the work
to be performed or on the use
of the tool. Estimate the stress
21