Control Panel; Operation Selection; Buttons With Multiple Functions - Fieldmann FZRR 5650-A User Manual

5. CONTROL PANEL

The control panel cover protects the display from prolonged exposure to sunlight. Without this protection, the display could easily be damaged by prolonged strong
sunlight, shortening its lifespan.
Open the cover to access the control panel.
All commands for the robotic lawn mower are entered and settings are made through this control panel.
All functions are accessible through several menus.
The control panel consists of a display and six buttons.
All information is displayed on the screen and all input is done using the buttons.
IMPORTANT INFORMATION
After completing operations on the control panel, always close the control panel cover to
allow the robotic lawn mower to start. If the cover is not closed, the message "Close Cover"
will appear on the display and the robotic lawn mower will not start.
When you press the STOP button and open the cover, the home screen appears, showing the date, time, selected working zone, rain sensor status and battery status.
• If the timer is not set for any scheduled daily work, "Standby" is displayed at the top of the screen.
• If the timer is set to daily work, the selected working zone is displayed at the top of the screen.
• The rain symbol ( ) indicates that the rain sensor is activated (on).
If the rain sensor is not activated (off), this symbol is not displayed.
• The battery status symbol (
The six buttons are divided into two groups: operation selection buttons and multi-function buttons.

OPERATION SELECTION

Buttons for selecting an operation include:
Symbol Button Name
UP
DOWN
BACK

BUTTONS WITH MULTIPLE FUNCTIONS

Symbol Button Name
START
HOME
POWER SWITCH
Usually the main functions of these two buttons are applied.
Only during the setup process, after pressing the SET button (
Once the setup is complete, the secondary function of these buttons will be disabled and the main function will be applied.
The two multi-function buttons offer different functions, depending on where you are in the menu structure.
ROBOTIC LAWN MOWER
) shows the remaining charge level.
Function
Move the cursor up or increase numerical value
Move the cursor down or decrease numerical value
Exit the current interface, return to a higher-level menu
Function
Main function: manually start the robotic lawn mower
Secondary function: move cursor to the left
1. Send the robot back to the charging base and end the current work (if the robot has not completed the
planned time after a full charge, it will resume work)
2. Move the cursor to the right
3. Activate cutting on the perimeter wire: move the mower out of the charging base after pressing the "HOME"
button
Single press: Switch on the robot
3 seconds long press: Switch off the robot
Selection enters a sub-menu or confi rms individual settings
), will the secondary function of these two buttons be applied.
19 EN
Control panel
USER MANUAL