Table of Contents
Advertisement
EN
26
Maintenance
Chassis
Clean the underside of the chassis. Use a brush or damp cloth.
Wheels
Clean the area around the front and rear wheels, as well as the wheel holder or shaft.
Body
Use a damp, soft sponge or cloth to clean the body. If the body is heavily soiled, a soap solution or dishwashing detergent may be necessary.
Charging Base
Regularly clean the charging base from grass, leaves, twigs, and other objects that may hinder parking.
TRANSPORTATION AND DISPOSAL
Secure the machine during transportation. It is important that the robotic lawn mower remains stationary, e.g. when transported between lawns.
The lithium-ion batteries contained are subject to the requirements of dangerous goods legislation.
During commercial transport, e.g. by third parties or forwarders, special requirements for packaging and labelling must be observed.
When preparing the item for transport, consult with a hazardous materials expert. Also, comply with all applicable national regulations.
DURING STORMS
To reduce the risk of damage to electrical components in the robotic lawn mower and its charging base, it is recommended to disconnect all connections to the
charging base (power and perimeter wire) in the event of a storm.
BLADE REPLACEMENT
WARNING
When replacing, always use original blades.
There are three blades screwed onto the blade disc of the robotic lawn mower. All three blades must be replaced simultaneously to maintain balance in the cutting
system.
How to replace the blades:
1. Hold down the power switch
2. Wear protective gloves.
3. Turn the robotic lawn mower upside down.
4. Insert the spanner into one of the two holes in the disc and secure its end in the groove of the blade disc guard to prevent the
disc from rotating.
5. Unscrew the centre screw on the blade disc, and then unscrew the securing screws of the blades using a fl at or cross-point
screwdriver.
6. Screw in the new blades and mount the blade disc.
BATTERY REPLACEMENT
The battery is maintenance-free, but its lifespan is limited to 2 to 4 years.
The battery lifespan depends on the length of the season and the number of hours per day the robotic lawn mower operates. A long season or many hours of daily use
means the battery needs replacing more frequently.
IMPORTANT INFORMATION
At the end of the season, before winter storage, fully charge the battery.
Battery Replacement
If the working time of the robotic lawn mower between individual charges is shorter than usual, it indicates that the battery is aging and needs
replacement. The battery is fi ne as long as the robotic lawn mower can maintain a well-cut lawn.
IMPORTANT INFORMATION
Always use only original batteries. Compatibility with other batteries cannot be guaranteed.
1. Hold down the power switch
2. Turn the robotic lawn mower upside down. Place the robotic lawn mower on a soft, clean surface to avoid
scratching its body and display cover.
3. Clean the area around the battery cover.
4. Unscrew the two screws on the battery cover and remove the cover.
5. Pull out the old battery and disconnect the connectors between the battery and the main board.
6. Insert the new original battery and reconnect the connectors.
7. Remount the battery cover. If the seal on the battery cover is visibly damaged, the battery cover must be replaced.
8. Screw back the two screws holding the battery cover.
for 3 seconds to switch off the power.
for 3 seconds to switch off the power.
FZRR 5650-A, FZRR 5950-A
Advertisement
Table of Contents
