Table of Contents
Advertisement
1-2. Removing the Cabinets
1-2-1. Removing Cabinets of Processor Unit
1. Turn off the main power, and disconnect the plug from
the outlet.
2. Loosen the four screws (with drop-safe) and remove
the front panel.
B4 x 10
(with drop-safe)
B4 x 10
(with drop-safe)
Front panel
3. Loosen the two screws (with drop-safe), press the two
levers in the direction of arrow A, and remove the CN-
2836 board.
4. Loosen the two screws (with drop-safe) and remove
the CN-2835 board.
(If the optional CN-2843 board (BKE-701A) is
attached, remove it in the same manner.)
Optional
CN-2843 board (BKE-701A)
CN-2835 board
CN-2836 board
Lever
A
BVE-700A
5. Loosen the two screws (with drop-safe) and remove
6. Remove the four screws and remove the two board
B4 x 10
7. Remove the eight screws a and pull out the rear
(with drop-safe)
8. Remove the harness from the connector CN2 on the
9. Remove the sixteen screws b and remove the top
Screws
(with drop-safe)
B3 x 5
Screws
(with drop-safe)
B4 x 6
A
Lever
the fan assembly from the connector CN3 on the MB-
1092 board.
lever bases.
MB-1092 board
CN3
B2 x 6
panel slightly in the direction of arrow A.
MB-1092 board and remove the rear panel.
panel in the direction of arrow B.
b
B3 x 5
Top panel
b
B
b
a
B4 x 6
Rear panel
Fan assembly
Screws
(with drop-safe)
B2 x 6
Board lever bases
MB-1092 board
CN2
Harness
Washer
PS4 x 8
B4 x 6
b
PSW3 x 8
b
a
B4 x 6
A
a
B3 x 5
1-3 (E)
Advertisement
Table of Contents
