Replacing The V-Belt - Bomag BW 100 AD-5 Operating & Maintenance Instructions

Maintenance – Every 500 operating hours
Fig. 129
Fig. 130
8.9.2

Replacing the V-belt

160
5. Unscrew the drain plug (1) and catch run-
ning out fuel.
6. Open the quick lock (2) and take off the
fuel filter (3).
7. Clean the sealing face on the filter carrier
from any dirt.
8.
NOTICE!
Danger of engine damage!
– Never fill filters beforehand,
to avoid the entry of dirt into
the clean side.
Slightly oil the rubber seal on the new fuel
filter.
9. Attach the fuel filter (1) with the quick lock
and ensure correct coding.
10. Close the quick lock (2) so that is engages
noticeably.
11. Screw in drain plug (3).
12. Dispose of fuel and fuel filter in an environ-
mentally friendly manner.
Perform this maintenance work at
the latest after two years.
BW 100 AD-5