Table of Contents
Advertisement
Software scaling of measurements is not supported on the Macintosh operating
Note
system. Refer to the
section for more information about measurement scaling.
Unpacking the Module
Caution
Never touch the exposed pins of connectors.
Installing the Module
Refer to the Read Me First: Safety and Radio-Frequency Interference document
Caution
before removing equipment covers or connecting/disconnecting any signal wires.
© National Instruments Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
❑
Numbers 1 and 2 Phillips screwdrivers
❑
Wire insulation strippers
❑
NI-DAQ (current version) for Windows 2000/NT/XP
Converting Voltage Measurements to Temperature Measurements
SCC modules are shipped in antistatic envelopes to prevent electrostatic
damage (ESD) to the modules. ESD can damage several components on
these products.
To avoid damage from ESD when you handle the module, take the
following precautions:
•
Ground yourself by using a grounding strap or by touching a grounded
object.
•
Touch the antistatic envelope to a metal part of the computer chassis
before removing the module from the envelope.
Remove the module from the envelope and inspect the module for loose
components or any sign of damage. Notify NI if the module appears
damaged in any way. Do not install a damaged module.
Store the module in the antistatic envelope when it is not in use.
3
SCC-TC Series Thermocouple Input Modules User Guide
Advertisement
Table of Contents
