Unpacking The Kit; Verifying The Kit Contents - National Instruments sbRIO-9607 Getting Started

Unpacking the Kit

Notice
To prevent electrostatic discharge (ESD) from damaging the
device, ground yourself using a grounding strap or by holding a grounded
object, such as your computer chassis.
1. Touch the antistatic package to a metal part of the computer chassis.
2. Remove the device from the package and inspect the device for loose
components or any other sign of damage.
Notice
Note
3. Unpack any other items and documentation from the kit.
Store the device in the antistatic package when the device is not in use.

Verifying the Kit Contents

Verify that the following items are included in the sbRIO-9607 kit.
Figure 1. sbRIO-9607 Kit Contents
1 2
1. sbRIO Device
2. NI CompactRIO Device Drivers Media
3. Getting Started Guide
4. Power Supply
Never touch the exposed pins of connectors.
Do not install a device if it appears damaged in any way.
3
sbRIO-9607 Getting Started
© National Instruments
5