National Instruments SCAL-4339 Note To Users

Shunt calibration accessory

Download this manual

NOTE TO USERS

SCAL-4339 Shunt

Calibration Accessory

The SCAL-4339 Shunt Calibration Accessory allows you to

supply per channel shunt resistors to the RM-4339 through a

25-pin D-SUB connector.

Refer to the NI PXIe-4339 and RM-4339 Installation Guide and

Terminal Block Specifications document for SCAL-4339 Shunt

Calibration Accessory information. Any resistors you supply are

programmatically connected to the SCA pins of the RJ-50

connector.

Page 1 NOTE TO USERS SCAL-4339 Shunt Calibration Accessory The SCAL-4339 Shunt Calibration Accessory allows you to supply per channel shunt resistors to the RM-4339 through a 25-pin D-SUB connector. Refer to the NI PXIe-4339 and RM-4339 Installation Guide and Terminal Block Specifications document for SCAL-4339 Shunt Calibration Accessory information.
Page 2 For patents covering National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents . You can find information about end-user license agreements (EULAs) and third-party legal notices in the readme file for your NI product.