Table of Contents
Advertisement
on the intake water temperature, since the dishwasher is fitted with the HTR system, which
requires set temperature and pressure for rinsing.
Indicator lights showing: off; green; orange;
To select a supplementary function, when the program required is shown on the display (P1, P2, P3 or
P4) press the
button. Only one supplementary function can be selected for each program.
10.1 Selecting the crys"glassware" function (available in P1‐P2)
Reduces the program's rinsing temperature and duration
After selecting the "Crys" function, perform a cycle with the appliance empty to stabilise the boiler
temperature
10.2 Selecting the erin "extra rinse" function (available in P1‐P2‐P3‐P4)
Extends the duration of the rinse
During performance of cycles with Extra Rinse, the cycle duration increases by about 30" because of the
increased duration of the rinsing phase and the time consequently required to restore the level and
temperature in the boiler. If the Termostop is OFF and the dishwasher is connected to cold water, this
function will be less effective
10.3 Selecting the "sanitisation" function (only available in P3)
Increases the program's washing and rinsing temperatures and duration
10 SUPPLEMENTARY FUNCTIONS
Press
then press
‐ CW 520/530
flashing.
and hold it down to select the glassware function
to confirm the program start.
Press
and hold it down to select the extra rinse
function then press
28
to confirm the program start.
Hide quick links:
Advertisement
Table of Contents
