Table of Contents
Advertisement
PROGRAM
Glasses and plates with light dirt
P1
P1 +
Glass, plastic trays, pre-washed plates
glass option
Glasses, cups and plates with light dirt
P2
P2 +
Normal cycle for glass.
glass option
Very dirty dishes and cutlery
P3
P3 + sanitisation
Cycle for sanitising plates and glasses.
option
Depending on the duration set.
P4
(*)
The cycle duration stated above refers to three-phase appliances supplied with hot water at 50°C.
If the appliance is supplied with cold water, the cycle duration might increase depending on the intake
water temperature, since the dishwasher is fitted with the HTR system, which requires set temperature and
pressure for rinsing.
Indicator lights as follows:
To select a supplementary function, when the program required is shown on the display (P1, P2, P3 or P4)
press the
button. Only one supplementary function can be selected for each program.
10.1 Selecting the "glassware" function (available in P1-P2)
Reduces the program's rinsing temperature and duration
10.2 Selecting the "extra rinse" function (available in P1-P2-P3-P4)
Extends the duration of the rinse
15
9 CHOOSING THE PROGRAM
TYPE OF DIRT
10 SUPPLEMENTARY FUNCTIONS
off;
green;
orange;
About 60".
About 50".
About 90".
About 75".
About 150".
About 5'.
As required from 3 to 15'.
flashing.
Select the program required
Hold
down to select the glassware function then
to confirm the program start.
Select the program required
DURATION (*)
(7.4 OPERATION)
(7.4 OPERATION)
Advertisement
Table of Contents
