Installation And Positioning - Smeg CW520 Manual

KEY TO LETTERS USED IN DIAGRAM
R LOWER BACK PANEL
C FILLER HOSE
Q
EARTH TERMINAL
E ELECTRICITY SUPPLY CABLE
P PERISTALTIC HOSES
S DRAIN HOSE
EXTERNAL DISPENSER POWER CABLE ENTRY
T
POINT
INSTALLATION and POSITIONING
Bring the dishwasher to the installation site, remove the packaging and check the appliance and
components for damage; any damage found must be reported to the transporter in writing.
The packaging components (plastic bags, expanded polystyrene, nails, etc.) must not be left within reach
of children and pets since they are potentially dangerous. All packaging materials used are environment‐
friendly. They can be kept without constituting any hazard, or may be disposed of at a specialist waste
disposal centre. The plastic components suitable for recycling are marked as follows: PE polyethylene:
external packaging film, bag containing the instructions, protective bags. PP polypropylene: straps. PS
expanded polystyrene: corner guards, top of packaging. Wooden and cardboard components can be
disposed of in accordance with the relevant regulations. When the product is decommissioned it must
not be dumped in the environment; it must be disposed of in accordance with the relevant regulations.
All metal parts are in stainless steel and can be removed. The plastic parts are marked with the symbol
identifying the material used and must be disposed of in accordance with the relevant regulations.
When the product is decommissioned it must not be dumped in the environment; it must be disposed of
in accordance with the relevant regulations. All metal parts are in stainless steel and can be removed.

3 INSTALLATION AND POSITIONING

‐ CW 520/530
9