Sliding Sash Window (Optional) - Gree GPC07AQA-K5NNA1A Owner's Manual

Sliding sash window (Optional)

1. Cut the Foam seal B (adhesive type) to the proper
length and attach it to the window frame and to
the side of sash.
2. Install the window panel into the window frame.
Make sure that the exhaust cover is attached to
the window panel.
Foam seal B (adhesive type)
770mm
770mm-
1210mm
1210mm-
1650mm
3. Close the window sash securely against the
window panel.
4. Stuff the foam seal A between the glass and the
window to prevent air and insects from getting
into the room.
5. Attach the bracket with a screw.(Recommend-
ed)
Bracket
Please lay a tabular material underneath the
window panel in case you could not attach the
Rear clip properly due to the deep window sill.
19