8.2.3 Lifting Wet Loads; 8.2.4 Downtime - probst SH-2500 Operating Instructions Manual

Operating Instructions
SH 2500-UNI-B

8.2.3 Lifting wet loads

●
The lifting device is not intended for picking up wet stone slabs. When picking up wet stone slabs, please observe
the following:
●
Remove water from the suction surface.
●
Carry out the following points after working with damp parts:
●
Lift up the lifting device. Make sure that the area around the suction plate is clear and that no items or water can be
drawn in.
●
Let the pump idle to run dry for at least 5 minutes.
●
Then switch off the device.
●
Open the condensate drain screw on the bottom of the storage container. Drain the water completely and tighten
the drain screw securely.

8.2.4 Downtime

Store the device in a closed and frost-free room (not uncovered outdoors).
Pos: 23 /==== ===== ===== ===== ===== ===== == @ 0\mod8_2. doc @ 5159 @
Pos: 24 / 99 geräte spez. M odule/ PG2 Va kuum - Verle ge systeme /SH UNI 2500 b/F ehler suc he SH uni 2500 b/SH... @ 0\m od17 6_2. doc @ 8215 @ 1
25 / 32
Operating
condensate drain screw
V7 GB