Stiga CS 20 Li B Operator's Manual page 93

2. PRODUCT DESCRIPTION
This machine is a gardening tool and precisely a portable
chainsaw powered by batteries
The machine is
batteriespowered motor and a guide bar that takes the
power from the battery to the motor which drives the
cutting chain.
ATTENTION
This tool may cause hand-arm vibration syndrome
if its use is not adequately managed.
Intended and improper use
This machine was designed and manufactured for:
- trimming and cutting of tall tree tops;
- cutting hedges, trunks or wooden beams, the diameter
of which depends on the length of the guide bar;
- cutting wood only;
;Any other usage not in keeping with the above-
mentioned ones may be hazardous and harm persons
and/or damage things. Examples of improper use may
include, but are not limited to:
- trimming hedges;
- carving operations;
- sectioning pallets, crates and various packing materials;
- sectioning furniture or other materials with nails, screws
or other metal components;
- butchering meat;
- using the machine to cut materials other than wood
(plastic materials, building materials);
- using the machine to lift, move or split objects;
- use of the machine by more than one person.
IMPORTANT Improper use of the machine will void
the warranty and relieves the Manufacturer of any liabili-
ty, placing all responsibility for damage or injury, to him/
herself or third parties, on the user..
IMPORTANT This machine is intended for use only by
operators trained in forest maintenance.
IMPORTANT The machine only works with both bat-
teries inserted.
NOTE The batteries can be charged directly on the ma-
chine with its charging dock
2.1. MACHINE COMPONENTS
(Fig. 1)
B. Front hand grip
C. Rear hand grip
D. Front hand guard
E. Guide bar
F. Toothed chain
G. Chain restraint pin
H. Spiked bumper
I. Quick tensioning
J. Bar cover guard
K. Batteries
L. Battery charger
M. Tip Guard
N. tightening knob
O. Rail for wall fixing
P. Charging dock
essentially composed
Q. Loop
R. Screws and plastic dowels supplied
of
2.2. SAFETY SIGNS
IMPORTANT
replaced. Order replacement decals from an authorised
service centre.
EN - 5
(FIG. 2)
Danger!
Read the instructions before
operating the machine.
Wear ear protectors, safety
goggles and a protective helmet.
Wear gloves and non-skid safety
boots!
Beware of kickback! Kickback
is the rapid and uncontrollable
backward motion of the chainsaw
in the direction of the operator.
Always work in complete safety.
Use chains with safety links that
limit kickback.
ATTENTION! Attention! Never
hold the machine with one hand!
Hold the machine firmly with both
hands to control the machine and
reduce the risk of kickback
Do not leave the machine in the
rain or in damp conditions.
Remove the battery before
any inspection, cleaning or
m a i n t e n a n c e / a d j u s t m e n t
operation on the machine
ATTENTION!
For battery and battery charger
see the dedicated manual
Any damaged or illegible decals must be
.