Intel atom emx-cdv mini itx motherboard with intel ich10r chipset (62 pages)
Summary of Contents for Avalue Technology MX610HD
Page 1
MX610HD 12th/13th Gen Intel® Core™ Processors Thin Mini-ITX Motherboard with Intel® H610E Chipset User’s Manual Ed – 13 January 2024 Part No. E2047MX6D00R...
Page 2
Disclaimer Avalue Technology Inc. reserves the right to make changes, without notice, to any product, including circuits and/or software described or contained in this manual in order to improve design and/or performance. Avalue Technology assumes no responsibility or liability for the...
Page 3
Applications that are described in this manual are for illustration purposes only. Avalue Technology Inc. makes no representation or warranty that such application will be suitable for the specified use without further testing or modification.
Page 4
A product returned without proof of the purchase date is not eligible for warranty service. Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer. 4 MX610HD User’s Manual...
1.2 Packing List Before you begin installing your single board, please make sure that the following materials have been shipped: 1 x mini-ITX MX610HD motherboard 2 x I/O Shield (Full Size I/O Shield+ Half Size I/O Shield) ...
We strongly recommend that you study this manual carefully before attempting to set up MX610HD or change the standard configurations. Whilst all the necessary information is available in this manual we would recommend that unless you are confident, you contact your supplier for guidance.
1 x RS-232 Headers with Voltage Selection (2.0mm Pitch) Internal I/O 2 x RS-232/422/485 Headers with Voltage Selection (2.0mm Pitch) 1 x USB 2.0 Headers with Shroud (2 Ports on Header) 1 x USB 3.2 Gen 1 Header with Shroud (2 Ports on Header) MX610HD User’s Manual 11...
Page 12
1 x 4 Pin Mini-Fit Jr DC-In Header Onboard I/O Operating 0~60°C (32~140°F) Temperature Operating 5%~90% relative humidity, non-condensing Humidity Size (L x W) 6.7" (L) x 6.7" (W) (170mm x 170mm) Note: Specifications are subject to change without notice. 12 MX610HD User’s Manual...
User’s Manual Arch 1.6 Architecture Overview—Block Diagramk Diagram The following block diagram shows the architecture and main components of EMX-H610P. MX610HD User’s Manual 13...
Page 14
Place four screws into the holes indicated by circles to secure the motherboard to the chassis. Do not over tighten the screws! Doing so can damage the motherboard. Place this side towards the rear of the chassis. 14 MX610HD User’s Manual...
4 x 1 wafer, pitch 2.54mm Chassis Fan connector CHA_FAN1 4 x 1 wafer, pitch 2.54mm Front Panel connector 5 x 2 header, pitch 2.54mm F_PANEL1 12V ATX power connectors 4 x 2 wafer, pitch 2.54mm ATX12V1 MX610HD User’s Manual 17...
Page 18
RJ-45 Ethernet Connector x 1 1 Gigabit Ethernet RJ-45 Ethernet Connector x 1 2.5 Gigabit Ethernet LAN2 USB 3.2 Type A connector Support 2 ports USB12 LINEOUT1 Line out port x1 Color: Lime Mic-in port x1 Color: Pink MICIN1 18 MX610HD User’s Manual...
Page 19
If you purchased a separate CPU heatsink and fan assembly, make sure that you have properly applied Thermal Interface Material to the CPU heatsink or CPU before you install the heatsink and fan assembly. MX610HD User’s Manual 19...
Page 20
To prevent damage to the socket pins, do not remove the PnP cap unless you are installing a CPU. Lift the Load lever with your thumb and forefinger to around 120º angle (C), then pull the PnP cap from the CPU socket to remove (D). 20 MX610HD User’s Manual...
Page 21
CPU notch. Keying Features Processor Corners 4x Pull back the load lever, then push the load lever (E) until it snaps into the retention tab. MX610HD User’s Manual 21...
Page 22
A DDR5 SODIMM is keyed with a notch so that it fits in only one direction. DO NOT force a DIMM into a socket to avoid damaging the DIMM. The DDR5 SODIMM sockets do not support DDR/DDR2/DDR3/DDR4 SODIMMs. DO NOT install DDR/DDR2/DDR3/DDR4 SODIMMs to the DDR5 SODIMM socket. 22 MX610HD User’s Manual...
Page 23
In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support. Make sure to unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. MX610HD User’s Manual 23...
User’s Manual 2.3.7 CPU fan connector (CPU_FAN1) Signal +12V FAN_SPEED FAN_PWN 2.3.8 System fan connector (SYSFAN1) Signal +12V FAN_SPEED FAN_PWN MX610HD User’s Manual 27...
User’s Manual 2.3.11 Serial Port connectors (COM1~3) COM1 COM2 Signal PIN PIN Signal COM3 DCD# DTR# DSR# RTS# CTS# RI3xPOWERxJMP 2.3.12 Serial Port connectors (COM1~3) STAT1 STAT2 Signal MX610HD User’s Manual 29...
Under BIOS: Manually brightness adjustment. Only with BIOS Mode can be adjusted. Defaults brightness value is 128, for range 1~255. Defaults is LVDS Interface. eDP Interface need H/W Operation. (eDP Connector by BOM option) 34 MX610HD User’s Manual...
If you do not press the keys at the correct time and the system does not boot, an error message will be displayed and you will again be asked to. Press F1 to Continue, DEL to enter SETUP 36 MX610HD User’s Manual...
Note: Some of the navigation keys differ from one screen to another. To Display a Sub Menu Use the arrow keys to move the cursor to the sub menu you want. Then press <Enter>. A “” pointer marks all sub menus. MX610HD User’s Manual 37...
BIOS Vendor and your systems manufacturer to provide the absolute maximum performance and reliability. Even a seemingly small change to the chipset setup has the potential for causing you to use the override. 38 MX610HD User’s Manual...
<Enter> to accept and enter the sub-menu. 3.6.1 Main Menu This section allows you to record some basic hardware configurations in your computer and set the system clock. MX610HD User’s Manual 39...
Setup option by highlighting it using the <Arrow> keys. All Advanced BIOS Setup options are described in this section. The Advanced BIOS Setup screen is shown below. The sub menus are described on the following pages. 40 MX610HD User’s Manual...
Display CPU information and related setting Intel(VMX)Virtualization[Enabled] When enabled, a VMX can utilize the additional hardware compatibilities provided by Vandorpool Technology Configuration options: [Enable] [Disable] Active Performance –Cores Number of P-core to enable in each processor package Hyper-Threading MX610HD User’s Manual 41...
When enabled, CPU will switch to minimum speed when all cores enter C state Configuration options: [Enable] [Disable] Package C state limit Maximum package C state limit setting. CPU default : Leaves to factory default value Configuration options: [C0/C1] [C2] [C3] 42 MX610HD User’s Manual...
When disabled ME will be put into ME temporarily disabled mode Configuration options: [Enable] [Disable] ME unlock control [Lock] When Set unlock, system will shut down for active function Configuration options: [Lock] [Unlock] 3.6.2.3 Trusted Computing Security device settings MX610HD User’s Manual 43...
Configuration options: [Suspend Disable] [S3 (suspend to RAM )] S3 Video Repost [Disabled] Enable or disable S3 video repost Configuration options: [Disabled] [Enabled] PCIE# wake from S5 [Disabled] Enable or disable PCIE wake the system from S5. Configuration options: [Disabled] [Enabled] 44 MX610HD User’s Manual...
Enable or Disable serial Port (COM) Configuration options: [Disabled] [Enabled] Change Setting [Auto] Select an optimal settings for super IO device Configuration options: as below COM mode Select [RS232] Configure the COM port Mode 46 MX610HD User’s Manual...
Configuration options: [RS232] [RS485 Half Duplex][RS422 Ful Duplex] 3.6.2.5.3 Serial Port 3 Configuration Serial Port [Enabled] Enable or Disable serial Port (COM) Configuration options: [Disabled] [Enabled] Change Settings [Auto] Select an optimal settings for super IO device Configuration options: as below MX610HD User’s Manual 47...
User’s Manual 3.6.2.6.1 Smart FAN Smart FAN Function [Enabled] Smart fan function Enable/Disabled Configuration options: [Enabled] [Disabled][Manual] 3.6.2.6.1.1 Smart FAN mode Configuration Setting different FAN on this motherboard CPU_FAN1/CHA_FAN1 FAN Target Smart FAN target temperature MX610HD User’s Manual 49...
Page 50
MX610HD User’s Manual Configuration options: Please see below picture CPU_FAN1/CHA_FAN1 MIN.FAN Speed (%) CPU or Chassis Smart FAN minimum settings Configuration options: Please see below picture 50 MX610HD User’s Manual...
Wake system from S5 [Disabled] Enabled or Disabled system wake on alarm event Configuration options: [Enabled] [Disabled] 3.6.2.8 Serial Port Console Redirection Console Redirection [Disabled] Enabled or Disabled COM1 Console redirection Configuration options: [Disabled][Enabled] MX610HD User’s Manual 51...
A parity bit can be sent with the data bits to detect some transmission errors Configuration options: [None][Even][Odd][Mark][Space] Stop Bits[1] Stop bits indicate the end of a serial data package Configuration options: [1][2] Flow Control[None] Flow control can prevent data loss from buffer overflow. Configuration options: [None][Hardware RTS/CTS] 52 MX610HD User’s Manual...
USB Mass Storage Driver Support [Enabled] Enable or Disable USB Mass Storage Driver Support Configuration options: [Enabled][Disabled] Mass Storage Devices [Auto] Mass Storage device emulation Type. “Auto” enumerates device according to its media format. 54 MX610HD User’s Manual...
Enabled or disabled IPv6 PXE boot Support Configuration options: [Enabled][Disabled] PXE boot wait time Wait time in seconds to press ESC key to abort the PXE boot. Media detect count Number of time the presence of media will be checked MX610HD User’s Manual 55...
3.6.2.12 IP configuration Auto Configuration[Disabled] Allow user to set IP. DisabledIP won’t set Every BootSets IP on every boot On demandUser has to set IP using IPConfig interface. 3.6.2.13 NVMe Configuration Display NVMe controller or Drive information 56 MX610HD User’s Manual...
Need to do clear Enrollment, if server is changed to DHCP. Configuration options: [Enabled][Disabled] Server Address [Enabled] Management server address to be used if Auto server searching is either disabled or failed. If changed, need to do clear Enrollment if already enrolled with previous IP. MX610HD User’s Manual 57...
Control the PCI Express Root Port. Enabled Disabled[Default] Set the ASPM Level: Force L0s – Force all links to L0s ASPM State AUTO – BIOS auto configure DISABLE – Disables ASPM L0sL1 Auto[Default] PCIe Speed Gen1/Gen2/ Configure PCIe Speed Gen3/Gen4/Gen5 MX610HD User’s Manual 63...
Enable or Disable integrated LAN to wake the system Configuration options: [Disabled][Enabled] Lan2 Controller [Enabled] Enable or Disable onboard LAN2 Configuration options: [Disabled][Enabled] Lan2 PXE OpROM [Disabled] Enabled or Disabled boot option for LAN2 controller Configuration options: [Disabled][Enabled] 64 MX610HD User’s Manual...
PCIe Speed [Auto] Select PCI Express Port speed Configuration options: [Auto][Gen1][Gen2][Gen3] [Gen4] Detect Non-compliance device [Disabled] Detect non-compliance PCI express Device, If enabled, it will take more time at Post time. Configuration options: [Disabled][Enabled] 66 MX610HD User’s Manual...
PCIe Speed [Auto] Select PCI Express Port speed Configuration options: [Auto][Gen1][Gen2][Gen3] [Gen4] Detect Non-compliance device [Disabled] Detect non-compliance PCI express Device, If enabled, it will take more time at Post time. Configuration options: [Disabled][Enabled] MX610HD User’s Manual 67...
Enable or Disable SATA port 2 Configuration options: [Enable ][Disabled] Port 3 [Enabled] Enable or Disable SATA port 3 Configuration options: [Enabled][Disabled] M2 port [Enabled] Enable or Disable SATA on M.2 Key M slot Configuration options: [Enabled][Disabled] 68 MX610HD User’s Manual...
Enable or Disable USB standby power Configuration options: [Disabled] [Enabled] USB56 Standby Power[Enabled] Enable or Disable USB standby power Configuration options: [Disabled] [Enabled] USB78 Standby Power[Enabled] Enable or Disable USB standby power Configuration options: [Disabled] [Enabled] MX610HD User’s Manual 69...
Reset the system after saving the changes. Restore Defaults Restore/Load default values for all the setup option. Launch EFI Shell from filesystem device Attempts to launch EFI shell application from one of the available filesystem devices. AMIFWUpdate Launches AMIFWUpdate MX610HD User’s Manual 73...