Table of Contents
Advertisement
7.5
Turning on/off the machine
The machine can be turned on/off by pressing the
button located to the rear of the machine.
7.6
First Use - Use after a Long
Period of Inactivity
Refill the machine. Fill the water tank (see section
"Filling the Water Tank"). Connect the plug of the
appliance to the mains (see section "Connection to
the Electric Network").
For a perfect Espresso: rinse the coffee circuit if using
the machine for the first time or after a long period of
inactivity.
Upon the first start up brew at least 0.5 litres of water
with no capsules. Open and close the capsule loading
tray and press the "Coffee" button - without inserting
the capsule - to start brewing. Repeat the procedure
until the specified quantity is reached.
Do not leave water inside the tank for more than 3 days.
Do not leave water in the circuit for more than 3 days
or, in case this happens, dispense water (with no
capsules) before brewing coffee.
These simple operations will allow you to always brew
excellent coffee.
They have to be performed:
• at first start-up;
• when the machine remains inactive for a long time
(more than 2 weeks).
7.6.1
At First Start-up
Press the power button on the back of the machine to
turn it on. The control panel display shows the
wording "SYSTEM BOOT". Then you are requested to
press a button.
Once you have pressed a button the control panel
display shows the wording "Start water circuit
priming?". The "Espresso" button is steady on.
Press the espresso button and the machine starts
priming the circuit. The following screen is displayed:
The machine will start its rinse cycle and warm up as
described in the section "Warm-up and Rinsing".
English
29
Advertisement
Table of Contents
