Saeco FOCUS PRO-DISC SUPO48 Operation And Maintenance Manual page 42

English
MENU ITEM
Power-on BU rinsing request
WATER HARDNESS
Descale Warning
Display contrast
Capsules warning
Exit
CREDIT MANAGEMENT
42
Description
function enabled
- OFF:
function not enabled.
- ON:
function enabled.
Press the OK button on the EXIT option to go back to the top level.
This function allows you to adjust water hardness:
- LEVEL 1: very soft water
- LEVEL 2: soft water
- LEVEL 3:
hard water
- LEVEL 4:
Very hard water.
For more details, see the "Measuring and Adjusting Water Hardness" chapter.
Press the OK button on the EXIT option to go back to the top level.
Through this function you can set the alarm indicating the need of machine descaling.
Damage resulting from failure to descale the machine is not covered by warranty.
- OFF:
function not enabled.
- ON:
function enabled.
Press the OK button on the EXIT option to go back to the top level.
This function allows you to adjust the contrast of the display to better view the messages.
The user, by means of the navigation arrows, can change the display contrast settings.
The modification of the contrast level is shown by the bar.
The user must press the OK button to confirm the choice and go back to the menu top
level.
This function allows you to enable/disable the alarm warning the user that the capsule
drawer needs to be emptied.
- OFF:
function not enabled.
- ON:
function enabled.
Press the OK button on the EXIT option to go back to the top level.
NOTE:
disabling this alarm may cause machine malfunctions, since the capsules may block the brew
group.
Through this option the user can go back to the menu top level.
This menu option allows to use the credit management functions for:
- Setting the activation threshold of credit alarms
- Setting the available credits.