Saeco FOCUS PRO-DISC SUPO48 Operation And Maintenance Manual page 26

English
Rinse the water tank thoroughly and fill it with fresh
drinking water up to the MAX level. Press the "OK"
button. The following screen is displayed:
Remove the drip tray. After emptying it put the drip
tray back into place. Press the "OK" button. The
following screen is displayed:
Place a large container under the dispensing spouts
(hot water and coffee). Press the "OK" button. The
following screen is displayed:
Press the "OK" button to pause the operation. Press the
"OK" button again to resume the operation. Once the
operation is complete the following screen is displayed:
26
The following screen is displayed:
In case machine descaling is not necessary or when
replacing one of the 8 filters, the activation procedure
starts from this point.
Select "YES" and press the "OK" button. The following
screen is displayed:
Put the filter into the empty tank. Press it to its limit
stop.