Table of Contents
Advertisement
MENU ITEM
Set Credits Alarm Threshold
Set Credits
Confirm Set Credits
Exit
Stand-by Time
Safety
.
Technical Menu Password
Description
This function allows to set a threshold below which the machine warns the user that the
credits are running out.
The thresholds that can be set are:
- 0 CREDITS:
the alarm is disabled
- < 5 CREDITS:
the machine warns the user when there are only 5 credits available
- < 10 CREDITS:
the machine warns the user when there are only 10 credits available
- < 20 CREDITS:
the machine warns the user when there are only 20 credits available
- < 50 CREDITS:
the machine warns the user when there are only 50 credits available.
Press the OK button on the EXIT option to go back to the top level.
This function allows credit charging in the machine.
The user must set the indicated number, increasing or decreasing it by means of the
navigation buttons.
By pressing the OK button the cursor under the digit is moved towards right.
By pressing the OK button, after the third digit, you access the "Confirm Set Credits"
screen.
Press OK on one of the following options:
- YES:
confirming and saving the set credits
- None:
resetting the number of credits and going back to the loading screen.
Press the OK button on the EXIT option to go back to the top level.
Through this option the user can go back to the menu top level.
This function allows you to adjust the time after which the machine must go into the
"stand-by" mode. In case it is not used:
- NO STANDBY:
the machine is always active
- 30 MIN:
the machine goes into the standby mode after 30 minutes of inactivity
- 60 MIN:
the machine goes into the standby mode after 60 minutes of inactivity
- 180 MIN:
the machine goes into the standby mode after 180 minutes of inactivity.
Press the OK button on the EXIT option to go back to the top level.
This function allows you to manage the passwords used to access different machine menus:
- Tech. Menu Password
- Service Menu Password
- User Menu Password.
By means of this option the user can manage the password of the technical menu:
- SET:
you can access this option if the password is not set
- DISABLE:
this option is only displayed if a password is already set
- CHANGE:
Press the OK button on the EXIT option to go back to the top level.
English
43
Advertisement
Table of Contents
