Rinsing And Self-Cleaning; Loading Capsules - Saeco FOCUS PRO-DISC SUPO48 Operation And Maintenance Manual

Table of Contents

Advertisement

Close the capsule loading tray. The machine activates
the warm-up phase to perform the cleaning cycle. The
display will show:
The following message is displayed:
The brew unit will dispense hot water. The cycle
cannot be interrupted. Then the machine is ready for
use.
If you select No, the machine activates the warm-up
phase and - once completed - it will be ready for
operation.
Upon product dispensing the machine may perform a
warm-up cycle, if necessary. The display will show:
9.2

Rinsing and Self-cleaning

This cycle allows to rinse the internal coffee circuit
with fresh water.
The machine requests to perform this cycle during the
warm-up phase only, in the following cases:
• Upon machine start-up, when it is cold.
• During the stand-by preparation phase, if at least one
coffee product has been brewed.
9.3

Loading Capsules

In order to dispense the
desired products, only use
Nespresso
or compatible capsules.
Capsules
compatible
Professional*
coffee
beans,
and/or freeze-dried coffee
should not be used.
The capsules supplied for
this machine are single-use
capsules and each of them
should be used for one
brewing cycle only.
Capsules should not be
reused to brew two or
more products.
English
Professional*
other
than
Nespresso
capsules,
ground
49

Advertisement

Table of Contents
loading

This manual is also suitable for:

Area focus supo48

Table of Contents