Saeco FOCUS PRO-DISC SUPO48 Operation And Maintenance Manual page 47

8.4.5 Setting Credits
Credits can be set to control sales. To set the credits,
proceed as follows:
Switch to machine programming mode as described in
section "Access to the Technical Menu".
In the Tech. Menu: settings, activate "Stop dispensing
with no credit" (ON).
Press the "Down" button or the "Up" button until the
following menu is displayed:
Press the "OK" button to confirm and access the
menu.
Press the "Down" button or the "Up" button until the
following menu is displayed:
The option "SET CREDITS" is displayed, which will
allow the number of credits to be manually entered.
Press the "OK" button to confirm and access the credit
charging page.
To charge credits:
Press the "Up" button or the "Down" button to set the
desired number.
Press the "OK" button to move to the next number.
Repeat the steps until the desired number of credits
has been entered. Once the last number has been
inserted the following screen is displayed:
Press the "Up" or "Down" button to select the option
"Yes" and confirm.
To exit, scroll the menu using the "Up" or "Down"
buttons until option "Exit".
English
47