Saeco FOCUS PRO-DISC SUPO48 Operation And Maintenance Manual page 45

MENU ITEM
Set
Confirm Password
Disable
Change
Exit
Restore Factory Settings
Reboot and Update from
SerProg
Exit
Back to Main Screen
Description
This function allows to set the 4-digit code to access the user menu
The user must set the desired number, increasing or decreasing it by means of the
navigation buttons.
By pressing the OK button the cursor under the digit is moved towards right.
By pressing the OK button, after the fourth digit you access the screen "Confirm
Password".
Press the OK button on the EXIT option to go back to the top level.
Press OK on one of the following options:
- YES:
confirming and saving the set password
- None:
going back to the password entering screen.
Press the OK button on the EXIT option to go back to the top level.
By means of this option the user can disable the set password.
In this case the password is set to "0000" by default.
By means of this option the user can change the set password.
Through this option the user can go back to the menu top level.
This function resets the factory configuration settings when a malfunction occurs.
By means of the OK button the user can confirm this choice.
By means of this option the user can download the firmware using the SerProgr Saeco kit.
By selecting this option by means of the OK button you can restart the machine.
This function takes you back to the main menu
Through this function the machine goes back to the "ready for use" mode.
English
45