Saeco FOCUS PRO-DISC SUPO48 Operation And Maintenance Manual page 23

Descale the
completely before using
the water filter.
In case you did not activate
the filter upon first use and
you already
more than 50 cups (with
100-ml capacity), descale
the machine
activating the filter.
Replace the water filter as
soon as its capacity drops
to 0% and the filter icon
blinks quickly. Replace the
water filter at least every 3
months, even
machine has
indicated the
replace it.
We recommend to buy a
new filter
capacity drops to 10% and
the filter
blinking slowly. In this way
you can replace the filter
when its capacity drops at
0%.
machine
prepared
before
if the
not yet
need to
when its
icon starts
The anti-scale filter should
be replaced
indicated by the machine.
Before descaling, remove
the anti-scale filter from
the water tank.
7.3.1 Preparing and installing the
water filter
You can install the water filter when first installing the
machine as part of the installation procedure. If you
did not install the water filter upon first use, you can
install it later by accessing the menu as described
below. Remove the water filter from its packaging.
The filter should be
measurements performed to set water hardness. Use
the water hardness test strip (not provided with the
machine).
A
Soft water
B Hard water (standard)
C
Very hard water.
Immerse the water filter vertically in cold water (with
the opening positioned upwards) and gently press its
sides to let the air bubbles out.
English
whenever
set according to the
23