Turning On/Off The Machine; Setting The Language (Upon First Use); First Use - Use After A Long Period Of Inactivity - Saeco AULIKA EVO TOP HSC Operation And Maintenance

US English
Before
product
bringing the
spout back to its normal
position, ensure that it is
correctly positioned. This
can be evidenced by the
CLICK indicating correct
positioning.
Otherwise, some product might leak out of the dispensing
spout.
7.11

Turning on/off the machine

The machine can be turned on/off by pressing the button
located to the rear of the machine.
38
brewing any
and/or when
dispensing
7.12 Setting the Language (Upon
First Use)
At first start-up, the desired display language of the
messages must be selected and stored. This allows the
beverage parameters to be adjusted to the specific taste of
the country where the machine is in use.
Select the language by pressing the "DOWN" button or
the "UP" button. Press the "OK" button to save the
language. The machine starts the system warm-up.
Upon first
warm-up
completed, the machine
primes the circuit and
performs a rinse cycle of
the internal circuits. During
this process,
amount of
dispensed. Wait for this
cycle to be completed.
7.13 First Use - Use after a Long
Period of Inactivity
Refill the machine (follow the instructions above).
Connect the plug of the appliance to the mains (see
section "Connection to the Electric Network").
For a perfect Espresso: rinse the coffee circuit if using the
machine for the first time or after a long period of
inactivity.
use, once
has been
a small
water is