Saeco FOCUS PRO-DISC SUPO48 Operation And Maintenance Manual page 46

English
8.4.4 Password setting
The PASSWORD must be set by the service provider
in order to prevent access by unauthorised personnel
who could change the machine settings and cause
malfunctions.
Three passwords can be set to access the three
different machine menus.
To set the PASSWORD, proceed as follows:
Switch to machine programming mode as described in
section "Access to the Technical Menu".
Press the "Down" button until the following menu is
displayed:
Press the "OK" button to enter the submenu of the
selected option. The following screen is displayed:
Press the "Down" or "Up" button to select the menu
for which the password must be set. Press the "OK"
button to confirm. The following screen is displayed:
46
Press the "Down" or "Up" button to select the option
"Set". Press the "OK" button to confirm and access
the password programming. The following screen is
displayed:
To enter the password:
Press the "Up" button or the "Down" button to set the
desired number. Press the "OK" button to move to
the next number.
Repeat the steps until the set password has been
entered. Once the last number has been inserted the
following screen is displayed:
Press the "Up" or "Down" button to select the option
"Yes" and confirm the password.
In case you want to change an already set password
follow the same procedure. The following screen will
be displayed:
Select "Disable" to cancel the previously set password,
or select "Change" to modify the previously set
password.