Table of Contents
Advertisement
EN
Creader Professional 129 EVO / EVO+
■
In general, vehicle identification numbers are standardized - all contain 17
characters. VIN characters may be capital letters A through Z and numbers 1
through 0; however, the letters I, O and Q are never used in order to avoid
mistakes of misreading. No signs or spaces are allowed in the VIN.
5.2.2. Manual Diagnosis
If the tool can not obtain the VIN information, you can also perform vehicle diagnosis
manually. In this mode, you need to execute the menu-driven command and then follow
the on-screen instruction to proceed.
Notes:
■
Before diagnosing, please make sure the diagnostic program corresponding to
certain vehicle model has been installed on your tool.
■
For vehicles manufactured by different vendors, it is possible that it has different
diagnostic menus. For details, please follow the instructions on the screen to
proceed.
Refer to the flowchart illustrated as below to diagnose a vehicle manually:
18
Advertisement
Table of Contents
