Manual Diagnosis - Launch X-431 Throttle III User Manual

LAUNCH
• If the VIN scanned is incorrect, tap the result field to modify it and then tap OK. If
the VIN exists on the remote server, the system will enter the vehicle information
screen.
• To scan it again, tap REPEAT.
2) Input the VIN, and tap OK, the system will automatically identify the vehicle model
and directly navigate to the vehicle information page.
*Note: In general, vehicle identification numbers are standardized - all contain 17
characters. VIN characters may be capital letters A through Z and numbers 1 through 0;
however, the letters I, O and Q are never used in order to avoid mistakes of misreading. No
signs or spaces are allowed in the VIN.
Tap SKIP to go to Diagnostics main menu screen.

5.2 Manual Diagnosis

In this mode, you need to execute the menu-driven command and then follow the
on-screen instruction to proceed.
Take Demo as an example to demonstrate how to diagnose a vehicle.
1). Select diagnostic software version: Tap DEMO to go to Step 2. (*Note: If more than one
version is available on this tablet, it will be listed on the screen.)
On-screen Buttons:
Vehicle Coverage: Tap to view the vehicle models that the current diagnostic software
X-431 Throttle III User Manual
25