Manual Diagnosis - Launch X-431 Manual

LAUNCH
• In case the tablet failed to detect it, tap
• To turn the flash on, tap
After scanning, the screen automatically displays the result.
• If the VIN scanned is incorrect, tap the result field to modify it and then
tap OK. If the VIN exists on the remote server, the system will enter the
vehicle information screen.
• To scan it again, tap REPEAT.
2) Input the VIN, and tap OK, the system will automatically identify the vehicle
model and directly navigate to the vehicle information page.
In general, vehicle identification numbers are standardized - all contain 17
characters. VIN characters may be capital letters A through Z and numbers
1 through 0; however, the letters I, O and Q are never used in order to avoid
mistakes of misreading. No signs or spaces are allowed in the VIN.
Tap SKIP to go to Diagnose main menu screen.

5.2 Manual Diagnosis

In this mode, you need to execute the menu-driven command and then follow
the on-screen instruction to proceed.
Take Demo as an example to demonstrate how to diagnose a vehicle.
1). Select diagnostic software version: Tap the DEMO to go to Step 2. (Note: If
more than one version is available on the tablet, it will be listed on the screen.)
X-431 Torque III User Manual
to enter it manually.
.
31