Table of Contents
Advertisement
6.
UPDATE
If some new software or APK can be updated, a numeric indicator will display on the
"Upgrade" module on the Job menu. In this case, you may use this option to keep it
synchronized with the latest version.
Notes:
■
To enjoy more functions and better service, you are strongly suggested to update it
on regular basis.
■
This function requires a stable network connection.
Tap "Upgrade" on the Job menu to enter the update center. By default, all diagnostic
software is selected.
To deselect certain software, tap "Unselect", and then check the box next to
vehicle model.
Tap "Update" to start downloading. It may take several minutes to finish it, please
be patient to wait. To pause downloading, tap "Stop". To resume it, tap "Continue". If
network connection failure occurs, tap "Retry" to try again.
Once download is finished, the software packages will be installed automatically.
7.
DATA
Figure 7 – 1
7.1 Diagnostic Report
This module stores all diagnostic reports generated in process of vehicle diagnosis.
All the diagnostic reports are sorted by Date and Make. If there are too many
reports stored, tap (Search) to filter and quickly locate it.
■
To select certain report, just check the box at the right lower corner of the report.
To select all reports, tap "Select All". To deselect all, tap "Unselect".
■
Tap it to view its details.
■
Select the desired report and then tap "Delete" to delete it.
Creader Professional 129 EVO / EVO+
EN
27
Advertisement
Table of Contents
