EN
Creader Professional 129 EVO / EVO+
7.2 Diagnostic Record
If user records the running parameters or waveform graphs while reading data
stream, it will be saved as diagnostic records and appear under this tab.
Tap "Diagnostic Record" to enter and select the desired data stream items and tap "OK"
to jump to the playback page.
On-screen Buttons:
Graph – displays the parameters in waveform graphs.
Combine – this option is mostly used in graph merge status for data comparison. In this
case, different items are marked in different colors.
Value – this is the default mode which displays the parameters in texts and
shows in list format.
Frame Playback – plays back the recorded data stream items frame by frame. Once it
is in frame playback mode, this button changes into "Auto Playback".
7.3 DTC Library
This option helps you to find the location of the vehicle's DLC.
Figure 7 – 2
Swipe the screen upwards/downwards to alter the value, then press [OK] button, the
screen will display definition of the DTC.
7.4 DLC(Data Link Connector) Location
This option helps you to find the location of the vehicle's DLC.
7.5 Feedback
This item allows you to feedback your diagnostic problems to us for analysis and
troubleshooting.
Tap "Feedback", the following 3 options will be displayed on the left column of
the screen.
28