Launch Creader PROFESSIONAL 129 EVO User Manual page 4

Hide thumbs Also See for Creader PROFESSIONAL 129 EVO:
Table of Contents

Advertisement

EN
Creader Professional 129 EVO / EVO+
Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This device has been evaluated to meet general RF exposure requirement. The
SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types
Professional Diagnostic Tool with model Creader Professional 129 EVO / EVO+ has
also been tested against this SAR limit. The highest reported SAR values for body-
worn is 1.19 W/kg. This device was tested for typical body-worn operations with the
back of the handset kept 0mm from the body. The use of accessories that do not satisfy
these requirements may not comply with FCC RF exposure requirements, and should
be avoided.
Hereby, Launch Tech Co., Ltd declares that the Creader Professional 129 EVO / EVO+
of Professional Diagnostic Tool is in compliance with Directive 201/53/EU.
The full text of the EU declaration of conformity is available at the following
internet address: http://www.cnlaunch.com/
Operation Frequency: WiFi 802.11b/g/n HT20:2412-2472MHz;
802.11n HT40:2422-2462MHz
Max. RF Output power: Wifi(2.4G): 19.88dBm
The RF frequencies can be used in Europe without restriction.
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Creader professional 129 evo+

Table of Contents