System Diagnosing; Smart Diagnosis (Auto-Detect) - Launch Creader PROFESSIONAL 129 EVO User Manual

5.2 System Diagnosing

This function is specially designed to diagnose electronic control systems of single
vehicle model.

5.2.1. Smart Diagnosis (Auto-Detect)

After connection, turn the ignition key on and the system enters auto-detect mode
Note: Please make sure the "Automatic detection on connect" in "Settings" is set
as ON.
CAUTION: Don't connect or disconnect any test equipment with ignition on or
engine running.
1. Once the system successfully obtains the VIN (Vehicle Identification Number)
information of the currently identified vehicle, it will continue scanning the vehicle
systems. After the scanning is complete, a diagnostic report will be automatically
generated and sent to your email box (if bound).
2. If the tool failed to access the VIN information, the screen will display as below:
Figure 5 – 2
Input the VIN, and tap "OK", the system will automatically identify the vehicle model. If
the vehicle VIN is successfully decoded, it will perform auto- diagnosis until a diagnostic
report is automatically output. Otherwise it will enter manual diagnosis mode. For
details on manual diagnosis, see Chapter 5.2.2.
Notes:
■ The most recognizable location for this number is in the top left corner on the
vehicle's dashboard. Other locations include the driver's door or post, and the
firewall under the hood.
Creader Professional 129 EVO / EVO+
EN
17