Step 4
Click Add, you can add current holiday to the list.
Click the drop-down list of the state; you can enable/disable holiday date.
●
Click
●
Step 5
Click Next to save settings.
5.15.2 Serial Port
After setting RS-232 parameters, the NVR can use the COM port to connect to other device to
debug and operate.
Procedure
Step 1
Select MAIN MENU > SYSTEM > Serial Port.
Step 2
Configure parameters.
Parameter
Function
Baud Rate
to change the holiday information. Click
Figure 5-296 Serial port
Table 5-85 Serial port parameters
Description
Select serial port control protocol.
Console: Upgrade the program and debug with the console and
●
mini terminal software.
Keyboard: Control this Device with special keyboard.
●
Adapter: Connect with PC directly for transparent transmission of
●
data.
Protocol COM: Configure the function to protocol COM, in order to
●
overlay card number.
PTZ Matrix: Connect matrix control
●
Different series products support different RS-232 functions.
Select baud rate, which is 115200 by default.
417
User's Manual
to delete current date.