Dahua NVR52-4KS2 Series User Manual page 145

Parameter
DHCP
MAC Address
IP Address
Subnet Mask
Default Gateway
To unbind NIC, on the TCP/IP page, click
Device restarts.
3. On the TCP/IP page, configure DNS server. This step should be performed when you
enable the domain name service.
You can get DNS server address or manually enter it.
Automatically get DNS server address: When there is a DHCP server in the network,
●
you can enable DHCP, and then the Device gets a dynamic IP address.
Enter DNS server address: Select IP Version, and then configure the preferred DNS
●
server and alternate DNS server.
4. On the Default Card drop-down list, select the default NIC.
5. Click Next.
Step 3 Enable P2P, and then click Next.
Scan the QR code on the actual page to download the app. Register an account and then
you can add the Device to the app.
Before using the P2P function, make sure that the NVR has connected to the WAN.
The Status becomes Online after you successfully configure P2P.
Description
Enable the system to automatically obtain a dynamic IP address.
Displays the MAC address of the Device.
Enter the IP address and then configure the corresponding subnet
●
mask and default gateway.
After configuration, click Test to check whether there is conflict in
●
IP address.
IP address and default gateway must be on the same network
segment.
129
. The unbinding will take effect after the
User's Manual