Vehicle Density - Dahua NVR52-4KS2 Series User Manual

5.9.15 Vehicle Density

You can configure the rules for traffic congestion and parking upper limit, , and view the counting
data on the live page.
Traffic congestion: The system counts the vehicles in the detection area. When the counted
●
vehicle number and the continuous congestion time exceed the configured values, an alarm is
triggered and the system performs an alarm linkage.
Parking upper limit: The system counts the vehicles in the detection area. When the counted
●
vehicle number exceeds the configured value, an alarm triggered and the system performs an
alarm linkage.
5.9.15.1 Enabling Smart Plan
To use AI by camera, you need to enable the smart plan first. For details, see "5.9.3 Smart Plan".
5.9.15.2 Configuring Vehicle Density
Procedure
Step 1 Select Main Menu > AI > Parameters > Vehicle Density.
Select a channel and then click Add.
Step 2
Select the Enable checkbox and then select a detection type.
Step 3
Figure 5-190 Vehicle density
311
User's Manual