1. Click
2. Click Setting next to Schedule to configure the alarm period.
The system performs linkage actions only for alarms during the arming period.
●
●
3. Configure alarm linkage. For details, see Table 5-50 .
4. Click Apply.
Select Enable checkbox and then click Apply.
Step 7
5.9.7.2.8 Loitering Detection
The system generates an alarm once the object is staying in the specified zone longer than the
defined duration.
Procedure
Select Main Menu > AI > Parameters > IVS.
Step 1
Figure 5-155 Schedule and alarm linkage
.
On the time line, drag to set the period.
You can also click
to set the period.
273
User's Manual