Dahua NVR52-4KS2 Series User Manual page 201

Step 4 Configure the parameters.
The parameters might vary depending on the manufacturer that you select.
Parameter
Channel
Manufacturer
Registration ID
IP Address
RTSP Port
HTTP Port
TCP Port
Username
Password
Figure 5-67 Manual add
Table 5-17 Remote channel parameters
Description
Select the channel that you want use on the Device to connect the
remote device.
Select the manufacturer of the remote device.
Please connect the Imou camera to the Device through the ONVIF
protocol, otherwise the Imou camera added through private
protocols cannot be connected.
Enter the registration ID of the remote device.
Enter the IP address of the remote device.
Enter the RTSP port number. The default value is 554.
Enter the HTTP port number. The default value is 80.
The default value is 37777. You can enter the value as needed.
Enter the username of the remote device.
Enter the password of the user for the remote device.
185
User's Manual