Dahua NVR52-4KS2 Series User Manual page 271

Parameter
Name
Direction
Target Filter
4. Click OK.
Step 6 Configure alarm schedule and linkage.
1. Click
2. Click Setting next to Schedule to configure the alarm period.
The system performs linkage actions only for alarms during the arming period.
●
●
3. Configure alarm linkage. For details, see Table 5-50 .
4. Click Apply.
Select the Enable checkbox and then click Apply.
Step 7
5.9.7.2.2 Intrusion
When the detection target passes the edge of the monitoring area, and enters, leaves or traverses
the monitoring area, the system performs an alarm linkage action.
Procedure
Step 1 Select Main Menu > AI > Parameters > IVS.
Table 5-33 Tripwire parameters
Description
Customize the rule name.
Set the tripwire direction, including A→B, B→A and A↔B.
Click and then select effective target. With Human and Motor
Vehicle selected by default, the system automatically identifies the
person and motor vehicle appeared within the monitoring range.
Figure 5-136 Schedule and alarm linkage
.
On the time line, drag to set the period.
You can also click to set the period.
255
User's Manual