5.9.8.2.2 Fall Detection
When someone falls from a height in the detection area and the duration of the action is greater
than the defined threshold, an alarm will be triggered.
Procedure
Select Main Menu > AI > Parameters > Stereo Analysis.
Step 1
Select a channel and then click Add.
Step 2
Select Enable and then set Type to Fall Detection.
Step 3
Step 4
Draw detection rule.
1. Click
stop drawing.
2. Configure parameters.
Parameter
Name
Sensitivity
Duration
Repeat Alarm Time
3. Click OK.
Step 5
Configure alarm schedule and linkage.
1. Click
2. Click Setting next to Schedule to configure the alarm period.
The system performs linkage actions only for alarms during the arming period.
●
●
3. Configure alarm linkage. For details, see Table 5-50 .
4. Click Apply.
Step 6
Click Apply.
, and then draw a detection area on the video image. Right-click the image to
Table 5-42 Parameters of fall detection
Description
Customize the rule name.
Set alarm sensitivity.
Set the minimum time of triggering an alarm when people fall.
Set repeat alarm time. If the alarm-triggering event continues, an alarm
will be triggered again when repeat alarm time passed.
Figure 5-161 Schedule and alarm linkage
.
On the time line, drag to set the period.
You can also click
to set the period.
279
User's Manual