Parameter
Channel
Display Mode
Linkage Track
Tracking Duration
Step 4
Click Apply.
Related Operations
When an intelligent event is triggered, the live page will display the linkage track effect.
Check the EPTZ linkage in the live page.
Right-click the live page, and then select EPTZ. Enable EPTZ, and then you can view local EPTZ live
videos.
Figure 5-48 EPTZ linkage
Table 5-15 Parameters description
Description
Select the linkage channel.
Select the number of tracked channels. Full screen, 1+1, 1+3 and 1+5
modes are available, and full screen is selected by default.
After Linkage Track is enabled, intelligent events will be tracked. It is
disabled by default.
Custom: Select the tracking duration time manually. For example, if
●
you set from 30 s to 60 s, after tracking object A for 30 s, if object B
appears, the camera will start tracking object B; if no other object
appears in the process of tracking A, the camera will stop tracking
object A after 60 s.
Continue till object disappears: The camera will stop tracking when
●
the detected object disappears in the image.
167
User's Manual