Dahua NVR52-4KS2 Series User Manual page 315

Hide thumbs Also See for NVR52-4KS2 Series:

Table of Contents

5.9.12.3 Configuring In Area No.

When the number of people in the detection area is larger or lower than the defined threshold, or

when the staying period exceeds the defined duration, an alarm is triggered.

Select Main Menu > AI > Parameters > People Counting > People Counting.

Select a channel, and then click Add.

Select the Enable checkbox, and then set Type to In Area No.

Draw people counting rule.

2. Configure the parameters.

3. Click OK.

linkage, see Table 5-50 .

Click Apply.

5.9.12.4 Configuring Queuing

After configuring queuing alarm, the system can realize the corresponding linkage actions once the

number of people in the queue or the waiting time has triggered an alarm.

Select Main Menu > AI > Parameters > People Counting > Queuing.

Figure 5-179 People counting

to draw a rule. Right-click the image to stop drawing.

and then enable in-area people number alarm and stay alarm.

under Trigger to configure the alarm schedule and linkage. For details on alarm

User's Manual