Table of Contents
Advertisement
How to Operate the Blanket Warmer
Before you begin
Procedure
Blank et Warmer
Ope ra tor 's Ma nua l
▪
The warmer must be connected to electric power and turned on.
WARNING:
Do not operate the warmer in the presence of a flammable
anesthetic mixture with air, oxygen, or nitrous oxide; in
oxygen-enriched environments; or in any other potentially
explosive environment.
WARNING:
Make sure the blanket support assembly and shelves are
installed to prevent the blankets from being scorched or
discolored.
Do not overload the cavity.
NOTICE
Allow 1" (25mm) between the blankets and the interior walls.
To operate the warmer, do the following.
Step
Action
1.
Set
the temperature in 5° increments using the Temperature Control Knob
.
The Temperature Display LED
heating the unit.
NOTE:
(16°C to 71°C).
2.
Open
the door and load the dry, cotton blankets into the warmer.
Close
the door.
NOTICE
MN-399 29
Re v 5
2/24
▪
▪
▪
Personal injury hazard.
Personal injury hazard.
will illuminate when the control is
The temperature set-point range is 60°F to 160°F
Do not warm items containing plastic, rubber, metal
snaps, studs, hooks, etc.
O
PERATION
Continued on next page
19
Advertisement
Table of Contents
