Maintenance Schedule
Daily
Monthly
Blank et Warmer
O pe rator ' s M a nual
▪
NOTE:
Do not remove exterior panels from the warmer or attempt
repairs. The warmer has no user-serviceable internal components.
Only perform routine cleaning and maintenance procedures
specifically described in this manual.
For daily maintenance, do the following.
Check:
the air vents in the airflow insert panels are not obstructed (if applicable).
▪
all fan guards are clear and not obstructed (if applicable).
▪
the number of bottles/bags, or blankets as applicable do not exceed the
▪
maximum capacity per shelf or basket.
Clean:
any spills with a clean, lint free cloth. See topic How to Clean the Warmer for the list
▪
of approved cleaners.
For monthly maintenance, do the following.
Check:
the door gasket for tears and holes. Make sure that it is firmly attached to the
▪
door. Check the seal when the door is closed.
the guards around the air temperature sensor are in place and fully secure to the
▪
warmer.
the hardware securing the warmer(s) to the wall, if applicable.
▪
Clean:
the outside of the warmer with stainless steel cleaner. See topic How to Clean the
▪
Warmer for the list of approved cleaners.
vacuum (if applicable):
▪
fan openings
□
fan sail switch
□
vent openings
□
MN-399 29
Re v 5
2/24
▪
▪
▪
M
AINTENANCE
Continued on next page
23