Emerson Rosemount 2151N Reference Manual page 66

Rosemount 2151N
Figure 5-10 – Installation of
Electronics Assembly Connector Plug
Figure 5-11 – Installation of
Electronics Assembly
Terminal Block Assembly
57
5. Push the electronics assembly (4) into the electronics
housing (5) and fasten with the two 6-32 captive
screws. Torque each captive screw to 7in-lb ±1 in-lb
(0.8 N-m ±0.1 N-m), or hand-tight (see Figure 5-11).
1. Install the terminal block assembly (6) into the "FIELD
TERMINALS" side of the electronics housing (5) and
torque the two 6-32 screws to 7in-lb ± 1 in-lb (0.8 N-m
±0.1 N-m), or hand-tight.
Reference Manual
00809-0000-4851 Rev AD
December 2023
Maintenance & Troubleshooting