Symbols Used In This Manual; Symbols On The Power Tool; Important Safety Information - Flex LE 12-3 100 WET Original Operating Instructions

Contents
Symbols used in this manual . . . . . . . . . 14
Symbols on the power tool . . . . . . . . . . 14
Important safety information . . . . . . . . . 14
Noise and vibration . . . . . . . . . . . . . . . . 16
Technical specifications . . . . . . . . . . . . 17
Overview . . . . . . . . . . . . . . . . . . . . . . . . 18
Operating instructions . . . . . . . . . . . . . . 19
Maintenance and care . . . . . . . . . . . . . . 22
Disposal information . . . . . . . . . . . . . . . 23
Declaration of Conformity . . . . . . . . . 23
Declaration of Conformity . . . . . . . . . 23
Exemption from liability . . . . . . . . . . . . . 24

Symbols used in this manual

WARNING!
Denotes impending danger. Non-
observance of this warning may result in
death or extremely severe injuries.
CAUTION!
Denotes a possibly dangerous situation.
Non-observance of this warning may result
in slight injury or damage to property.
NOTE
Denotes application tips and important
information.

Symbols on the power tool

To reduce the risk of injury,
read the operating instructions!
Wear goggles!
Wear ear protection!
Disposal information for the old
machine (see page 23)!
14
LE 12-3 100 WET/L 12-3 100 WET

Important safety information

WARNING!
Before using the power tool, please read
and follow:
these operating instructions,
-
the "General safety instructions" on the
-
handling of power tools in the enclosed
booklet (leaflet
the currently valid site rules and the
-
regulations for the prevention of
accidents.
This power tool is state of the art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged. The power tool
may be operated only if it is
used as intended,
-
in perfect working order.
-
Faults which impair safety must be repaired
immediately.
Intended use
Wet stone polishers are intended
- for commercial use in industry and trade,
- for the surface processing of natural
stone using suitable tools (sponge, foam
rubber and Velcro diamond wheels,
corundum grinding rings *),
- for use with tools and accessories which
are indicated in this manual or recom-
mended by the manufacturer.
The permitted circumferential speed and
the maximum diameter must not be
exceeded.
The wet stone polisher must not be used for
cutting or roughing.
Chain cutting wheels, saw blades and all
tools which require a guard are not
permitted.
* only permitted in conjunction with rubber coupling
240.338
no.: 315915),
-