Replacing The Microsd Card - Weidmüller u-control UC20-WL2000-AC-CAN Manual

11 Replacing components | Replacing the microSD card

11.5 Replacing the microSD card

Explosion risk!
▶ Before starting any work, make sure that
there is not a potentially explosive atmos-
phere!
Operation of the machine/system can
be disrupted!
▶ In the event of the machine/system being
put into a dangerous state as a result of
the removal of the supply voltage, a
replacement can only be made once the
machine/system is disconnected from the
power!
Danger of contact burns!
▶ Only replace the microSD card when it is
not under load current.
The product can be destroyed by elec-
trostatic discharge!
The components can be destroyed by electro-
static discharge.
▶ Please make sure that persons and work
equipment are sufficiently earthed!
▶ Unlock the connector frame and open it as far as possible
(at least to an angle of 90°).
70
WARNING
WARNING
WARNING
ATTENTION
Opening the connector frame
▶ Briefly press on the inserted microSD card in order to
unlock it.
▶ Remove the old microSD card.
▶ Insert the new microSD card.
Inserting the microSD card
▶ Close the connector frame.
Make sure that you remove all sensitive data from
the microSD card before disposing of it.
Manual u-control 2604080000/08/08.2023