Table of Contents
Advertisement
Connection diagram:
TV
Satellite Receiver/s
Key:
A:
Satellite Cable
B:
Satellite Cable. Note: For Skew variants, satellite cable labelled 'Control Box' must
be routed to 'B'
C:
Antenna Cable
Attach Satellite Dish to Antenna Unit -
50cm is already attached.
1.
Ensure Antenna Unit is free from obstacles.
2.
Press installation button on reverse of Control Box to elevate
antenna. Once elevated turn off power to Control Box and
remove fuse.
3.
Fix Satellite Dish to Antenna Arm using M6 Button
Head Screws, M6 Nuts and 6mm Plastic Washers.
The 65cm and 85cm satellite dishes have different fixing hole
positions. Therefore 4 of the holes will be unused.
4.
Remove all tools, packaging and obstructions from roof.
5.
Replace fuse and turn power switch on. Antenna will
automatically retract into the park position.
Caution:
Replace Nylon locking nuts if they have been removed more
than twice. The locking action of the Nylon becomes less
effective if repeatedly assembled and disassembled.
Testing Antenna Unit:
Position the vehicle so that there is an unobstructed view of the southern sky. Connect a TV and Satellite
Receiver and follow instructions on page 12 to search for a satellite.
Caution:
Before driving vehicle on a highway ensure adhesive has cured. Check all fasteners are secure.
Visit: www.maxview.co.uk - Search 'Target' for potential software updates
(Sat Cable labelled 'Control Box' - Skew only)
D
B
D:
Cable for PVR or additional Satellite Receiver
For 65cm & 85cm only
C
Not required
Ignition
A
5A Fuse
+
Page 11
Advertisement
Table of Contents
